TM-9-2520-238-34

M113A1 FOV, M113A2 FOV, M548 AND M548A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL; RIGHT ANGLE DRIVE, COOLING FAN; GEARCASE, TRANSFER; DRIVE ASSEMBLY, FINAL; DIFFERENTIAL, STEERING CONTROL; BRAKE, SINGLE DISK; CYLINDER ASSEMBLY, HYDRAULIC BRAKE

  TM-9-2520-238-34 - Page 142 of 319

TM 9-2520-238-34
REPAIR TRANSFER GEARCASE F — Continued
0019 00
17. Remove cap screw (1), washer (2), fan drive pulley (3), and machine key (4) from first intermediate gear shaft.
18. Straighten tabs on four key washers (5). Remove four cap screws (6), key washers, and retaining plate (7) from cover (8).
Remove encased oil seal (9), packing retainer (10), preformed packing (11), laminated shim (12), and packing (13) from
retaining plate. Discard packings, oil seal, shim, and key washers.
19. Straighten tabs on four key washers (14). Remove four cap screws (15), key washers, and retaining plate (16) from cover
(8). Remove laminated shim (17) and packing (18) from retaining plate. Discard packing, shim, and key washers.
0019 00-6


Back to Top