TM-9-2520-238-34
M113A1 FOV, M113A2 FOV, M548 AND M548A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL; RIGHT ANGLE DRIVE, COOLING FAN; GEARCASE, TRANSFER; DRIVE ASSEMBLY, FINAL; DIFFERENTIAL, STEERING CONTROL; BRAKE, SINGLE DISK; CYLINDER ASSEMBLY, HYDRAULIC BRAKE
TM-9-2520-238-34 - Page 140 of 319
TM 9-2520-238-34
REPAIR TRANSFER GEARCASE F — Continued
0019 00
12. Straighten tabs on four key washers (1). Remove four cap screws (2), key washers, and generator drive assembly (3)
from cover (4). Discard key washers.
13. Remove retaining ring (5) from hub on generator drive pulley (6). Separate pulley from input bearing retaining plate (7).
Discard retaining ring. Remove retaining ring (8), ball bearing (9), sleeve spacer (10), ball bearing (11), and retaining
ring (12) from retaining plate. Remove encased oil seal (13) from retaining plate. Discard retaining ring (5), retaining
ring (8), retaining ring (12), and oil seal. If needed, remove expansion plug (14) from pulley (6).
14. Remove dust deflector (15) from hole connecting annular oil groove and bearing area.
15. Remove laminated shim (16) and packing (17) from retaining plate (7). Discard shim and packing.
0019 00-4
Back to Top
