TM-9-2520-246-34-1

TRANSMISSION MODEL 3053A; TRANSMISSION TRANSFERS MODEL T-136-21 AND MODEL T-136-27; POWER TAKEOFFS MODEL WN-7-28, MODEL WND-7-28 AND MODEL P-136-C

TECHNICAL MANUAL; MAINTENANCE, DIRECT SUPPORT AND GENERAL SUPPORT LEVEL

JANUARY 1981

TM-9-2520-246-34-1 - Page 116 of 418

TM 9-2520-246-34-1

e. Input Shaft Bearing Cap.

FRAME 1

NOTE

There is an oil return channel in bearing

oil return hole in gasket (2). They must

oil return hole in transmission case (3).

cap (1) and an

be alined with

1.

Put on gasket (2) and bearing cap (1), alining holes.

2.

Put in four capscrews (4) and four lockwashers (5). Tighten capscrews

evenly to 13 to 17 pound-feet.

END OF TASK

2-96