TM-9-2520-246-34-1

TRANSMISSION MODEL 3053A; TRANSMISSION TRANSFERS MODEL T-136-21 AND MODEL T-136-27; POWER TAKEOFFS MODEL WN-7-28, MODEL WND-7-28 AND MODEL P-136-C

TECHNICAL MANUAL; MAINTENANCE, DIRECT SUPPORT AND GENERAL SUPPORT LEVEL

JANUARY 1981

TM-9-2520-246-34-1 - Page 124 of 418

TM 9-2520-246-34-1

FRAME 2

1.

Put on gasket (1) and aline all screw holes.

2.

Put shifter shaft (2) in neutral position. Refer to TM 9-2320-209-10.

3.

Put on shifter shaft cover (3), making sure three forks (4) go into synchronizer

grooves (5) and groove in first and reverse gear (6).

4.

Put in eight capscrews (7) with eight lockwashers (8). Evenly tighten cap screws to

25 to 32 pound-feet.

END OF TASK

2-104