TM-9-2520-246-34-1

TRANSMISSION MODEL 3053A; TRANSMISSION TRANSFERS MODEL T-136-21 AND MODEL T-136-27; POWER TAKEOFFS MODEL WN-7-28, MODEL WND-7-28 AND MODEL P-136-C

TECHNICAL MANUAL; MAINTENANCE, DIRECT SUPPORT AND GENERAL SUPPORT LEVEL

JANUARY 1981

TM-9-2520-246-34-1 - Page 126 of 418

TM 9-2520-246-34-1

FRAME 2

1.

Hold release fork (1) in place.

2.

Put lever shaft (2) through clutch housing (3) and release fork (1) just enough so two

keys (4) can be put in keyways in lever shaft.

3.

Put in two keys (4). Push lever shaft (2) into clutch housing (3) until holes in two

keys line up with two screw holes in release fork (1).

4.

Put in two capscrews (5) with two lockwashers (6). Evenly tighten cap screws to

40 to 50 pound-feet.

GO TO FRAME 3

2-106