TM-9-2520-246-34
TRANSMISSION MODEL 3052, NSN 2520-00-347-4520
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL
MAY 1978
TM-9-2520-246-34 - Page 47 of 153
TM 9-2520-246-34
Figure 3-19. Removal of Shifter Shaft Cover.
Figure 3-18. Removal of Clutch Bell Housing.
NOTE
c. Companion Flange.
Slide the gears on the
mainshaft to lock the transmission. Remove the cotter
pin from the mainshaft and nut. Remove the retaining
nut securing the companion flange to the mainshaft.
(See fig. 3-20.) Using the universal puller (item 4, table
2-1) remove the companion flange. (See fig. 3-21.)
When assembling the companion flange.
coat the companion flange seal bearing
surface with a light coating of grease,
artillery and automotive (GAA), MIL-G-
10924. Use care not to damage the bearing
surface of the seal. Tighten the companion
flange retainer nut to 120-150 lb-ft torque.
Figure 3-20. Transmission Shifter Forks, Gears, and Synchronizers
in Neutral Position.
3-12
Back to Top
