TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 144 of 933

TM 9-2520-270-34

1. Remove cross shaft assembly if installed. See task

REPLACE CROSS SHAFT ASSEMBLY, page 4-458.

2. INSPECT SECOND RANGE BRAKE RING GEAR (1).

3. IS RING GEAR (1) SCORED OR DOES RING GEAR

HAVE SURFACE CRACKS?

1. USING FEELER GAGE, CHECK CLEARANCE (2) BETWEEN

TWO PADS ON EACH SECOND RANGE BRAKE (3)

AND RING GEAR (1).

2. IS EACH CLEARANCE (2) 0.021-0.060 INCH

10.53-1.52 mm)?

GO TO PAGE 2-82

GO TO NEXT PAGE

2-80