TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 518 of 933

TM 9-2520-270-34

14.1

CHECK DISK

(1).

a.

Using micrometer caliper set, measure

thickness of disk (1) in three places.

b.

Replace disk (1) if thickness is less than

0.150 inch (3.81 mm).

C

.

Using flat surface and feeler gage, check

disk (1) for warpage. Check inside and

outside edges in three places.

d.

Replace disk (1) if warpage is greater

than 0.010 inch (0.25 mm).

GO TO NEXT PAGE

Change 3

4-199