TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 514 of 933

TM 9-2520-270-34

4. REMOVE ELBOW (1).

a. Unscrew elbow (1).

b. Remove and discard preformed

packing (2).

6. REMOVE AND DISCARD

PREFORMED PACKING (6).

CAUTION

Do not pry against clutch disk. Damage

to equipment can occur.

5. REMOVE BRAKE (3).

a. Remove six self-locking bolts (4) and

washers (5). Discard bolts.

b. Using pry bar, pry off brake (3).

7. INSPECT METAL SEAL RINGS (7).

a. Inspect rings (7) for damage. See

page 2-5.

b. If rings (7) are damaged, go to step 8.

If not, go to step 12.

8. REMOVE TWO RINGS (7).

a. Squeeze ring (7) with fingers until

hooks (8) release.

b. Spread open and remove each ring (7).

Discard rings.

4-198

Change 1