TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 505 of 933

TM 9-2520-270-34

36. REPAIRER AND HELPER TURN

RIGHT-HAND INTERMEDIATE

HOUSING (1) OVER.

37. CHECK IWO SHOULDERED SHAFTS (2).

a. Using micrometer caliper set, measure

outside diameters of two shafts (2).

b. If either measurement is less than

0.4993 inch (12.682 mm), go to step 39.

If not, go to step 38.

38. INSPECT SCRIBE MARKS (3) ON

SHAFTS (2).

a. If scribe marks (3) are alined with small

holes in housing, go to step 40. If not,

go to step 39.

39. REPLACE RIGHT-HAND INTERMEDIATE

HOUSING. RECORD FAILURE ON DA

FORM 2407 AND RETURN DEFECTIVE

HOUSING TO DEPOT. GO TO STEP 42.

40. CLEAN RIGHT-HAND INTERMEDIATE

HOUSING.

a. Clean housing and piece parts. See

page 2-2.

41. INSPECT RIGHT-HAND INTERMEDIATE

HOUSING.

a.

b.

Inspect housing, piece parts, and

inserts. See page 2-5.

Repair inserts if damaged. See task

REPAIR RIGHT-HAND INTERMEDIATE

HOUSING INSERTS, page 4-195.

GO TO NEXT PAGE

Change 4

4-191