TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 507 of 933

TM 9-2520-270-34

47, INSTALL NEW BALL BEARING (1) IN

CROSS SHAFT SPUR GEAR (2)

a. If bearing (1) was removed. go to

step 47b. If not, go to step 48.

b. Using arbor press and bearing installer

(Item 6), press bearing (1) into gear (2).

c. Using screwdriver, install retaining

ring (3) in groove (4).

48. REPAIRER AND HELPER TURN

HOUSING (5) OVER.

49. INSTALL CROSS SHAFT SPUR GEAR (2).

a. Using plastic-faced hammer, tap

gear (2) onto mechanical housing (6).

GO TO NEXT PAGE

Change 4

4-193