TM-9-2520-272-34P
CROSS DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4 & 4A
TECHNICAL MANUAL; INTERMEDIATE, DIRECT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
TM-9-2520-272-34P - Page 76 of 488
TM 9-2520-272-34&P
4-6. INSTALL TRANSMISSION ON MAINTENANCE STAND
(SHEET 3 OF 7)
1
2
3
NOTE
•
If lifting brackets must be reinstalled on
transmission, go to Step 1.
Ž
If lifting brackets have not been removed
from transmission, go to Step 5.
Hold left lifting bracket (1) over bracket bolt holes in
left end cover (2), with bracket leaning toward center
of transmission.
Using combination wrench install two 3/8-16 x 1-1/2
inch bolts (3) and washers (4), to attach bracket (1) to
left end cover (2).
Repeat above Steps 1 through 2 to install right lifting
bracket (5) onto right end cover (6).
4 Using hoist and two-legged sling, attach sling hooks
into left lifting bracket (1) and right lifting bracket (5).
Go to Sheet 4
Para. 4-6, Task 2
4-15
Back to Top
