TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 526 of 620

TM 9-2520-272-40

0066

ADJUST RIGHT BRAKE

NOTE

Brake needs tightening if indicator passes APPLY mark when 40 lb-ft (54 N·m) is applied

with torque wrench.

Brake needs loosening if indicator does not get to APPLY mark when 40 lb-ft (54 N·m) is

applied with torque wrench.

Brake adjusting link should be turned only 1/16 turn (60 degrees) at a time until proper brake

adjustment is achieved.

Prior to removal of right brake adjusting cover, note location of chain in relation to bolt.

1. Remove six bolts (Figure 1, Item 1) and six washers (Figure 1, Item 2) that secure the right brake adjusting

cover (Figure 1, Item 3).

2. Remove right brake adjusting cover (Figure 1, Item 3) and gasket (Figure 1, Item 4). Discard gasket (Figure

1, Item 4).