TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 529 of 620
TM 9-2520-272-40
0067
SUSTAINMENT MAINTENANCE
GENERAL MAINTENANCE INFORMATION
INITIAL SETUP:
Tools and Special Tools
Heater, Gun-Type, Electric (WP 0079, Item 20)
Tool Kit, General Mechanic’s (GMTK) (WP 0079,
Item 45)
Wrench, Torque, Ratcheting, 1/2” Drive, 250 lb-ft
(WP 0079, Item 51)
Materials/Parts
Cloth, Abrasive, Crocus (WP 0078, Item 6)
Cloth, Batiste, Lint-Free, White (WP 0078, Item 7)
Gloves, Leather (WP 0078, Item 8)
Grease, High-Temperature (WP 0078, Item 9)
Lubricating Oil, Engine (WP 0078, Item 10)
Petrolatum, Technical (Petroleum Jelly) (WP 0078,
Item 12)
Rag, Wiping (WP 0078, Item 13)
Sealing Compound, Gasket (WP 0078, Item 14)
Sodium Phosphate, Tribasic Anhydrous (WP 0078,
Item 17)
Solvent, Cleaning (WP 0078, Item 18)
Personnel Required
Track Vehicle Repairer, 91H10
References
DA PAM 738-750
FM 38-700
FM 38-701
LO 9-2350-277-13
TM 9-214
TM 9-243
TM 9-2520-272-40P
WP 0075
SCOPE
This work package provides general maintenance practices that must be followed when working on the
transmission. This work package is provided to eliminate the need to repeat common maintenance practices
throughout this manual.
OVERVIEW
Follow the maintenance practices in this work package when working on the transmission. The maintenance
procedures in this manual cover normal maintenance situations. You may fndas
i
tua
t
ionwheretheprocedure
will not work because of contamination, overheating, or excessive wear. For example, a bearing may have to be
pressed out instead of lifted out as instructed in the procedure.
When a maintenance practice or procedure does not seem to be working for you, talk to your maintenance off cer
before trying any other method of doing the task. A bad method could damage good parts or cause unnecessary
damage to the transmission.
0067
‐
1
Back to Top
