TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 56 of 620
TM 9-2520-272-40
0003
Suggested Order of Disassembly and Assembly of the Major Assemblies of X200-4A Transmission
The following list is the suggested order for the transmission’s disassembly into and assembly from major
assemblies. Note that assembly is in reverse order from disassembly.
Remove Transmission Top Components
Install Transmission on Maintenance Stand
Remove Right Cover Assembly
Remove Left Cover Assembly
Remove Converter Element Components
Remove Input Housing Assembly
Remove Bevel Gear Assembly
Remove Hydrostatic Pump and Motor Assembly
Install Hydrostatic Pump and Motor Assembly
Install Bevel Gear Assembly
Install Input Housing Assembly
Install Converter Element Components
Install Left Cover Assembly
Install Right Cover Assembly
Remove Transmission from Maintenance Stand
Install Transmission Top Components
USABLE ON CODE
If multiple models were present in the Repair Parts and Special Tools List (RPSTL), the X200-4A Transmission
would be identif ed by a Usable On Code (UOC). X4A is the UOC for the X200-4A Transmission. In each RPSTL
f gure that contains multiple UOCs, under (6) Description and Usable on Codes (UOC), you will f nd the UOC for
the part, if applicable. If no UOC is listed, the part will be used in all models and all UOCs covered in that RPSTL.
ENDOFWORKPACKAGE
0003
‐
2
Back to Top
