TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 49 of 620
TM 9-2520-272-40
0002
The main item in the right side of the center housing assembly is the left brake assembly. The governor is housed
on the right side. The hydrostat, right output shaft, and sump communication tube are removed from this side of
the center housing assembly. Refer to Figure 8 for an exploded view of the major components in the right side of
the center housing assembly.
Hydrostatic Pump and Motor Assembly
Power steering unit. The steer control assembly must be removed in order to remove the hydrostat from the
transmission. External gears are removed when the hydrostat is replaced. Otherwise, the hydrostat is not dealt
with at the Sustainment Maintenance level. Figure 8 includes the hydrostatic pump and motor assembly in its
exploded view of the major components in the right side of the center housing assembly.
Back to Top
