TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 50 of 620
TM 9-2520-272-40
0002
TRANSMISSION IDENTIFICATION PLATE AND IUID DATA PLATE
Thetransm
iss
ioniden
t
if cation plate is located in the upper right quadrant on the rear side of the transmission.
Refer to Figure 9 for an illustration of the location of the transmission Modif cation Work Order (MWO)/Overhaul
Data Plate with Item Unique Identif cation (IUID).
The IUID is part of the transmission’s data plate. Each transmission overhaul shall be recorded on this data
plate. Minimum information to be recorded follows:
Initials of overhaul facility.
Serial number of transmission.
Identif cation of any MWO applied.
Date of MWO or overhaul application.
For instructions on how to remove or install the data plate, refer to TM 9-2350-277-13&P.
Back to Top
