TM-9-2540-207-14-P

HEATER, VEHICULAR COMPARTMENT, MODEL: A20

TECHNICAL MANUAL; OPERATOR, FIELD, AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2007

TM-9-2540-207-14-P - Page 141 of 288

TM 9-2540-207-14&P

5-97

9.

Start the heater and check that there are NO fuel leaks from the fuel connections.

10.

Install Top Cover (ref. 5.4.1).

5.9.7.2 Fuel Injector Repair (Design Iteration 2 & 3 Only)

Figure 5-28.

Fuel Injector

5.9.7.3 Removal

1.

Remove vehicle power cable from the MS Power connector.

2.

Remove Top Cover (ref. 5.4.1).

3.

Remove the two screws on the top of the horizontal portion of the fuel manifold.

4.

Move the fuel manifold assembly to the right, disengaging the right side of the fuel

injector from the left side of the vertical portion of the fuel manifold.

5.

Disengage the left portion of the fuel injector from the top housing.

6.

Rotate the Fuel Injector so that the wiring connector is facing upwards.

7.

Remove Power Fuel Injector connector (J5) by depressing the metal clip and gently

detaching the connector from the fuel injector.

Fuel Injector