TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 556 of 779

Figure 8-7. Pressure relief valve, humidity

indicator, and pneumatic valve -

installed view.

b.

Remove the engine from the container using

engine lifting multi-leg sling - 4910-919-2884

and place engine on suitable supports before

removing

the mounting brackets (fig. 8-8 )

secured to the oil pan. Remove six nuts, washers,

and bolts and remove mounting brackets from

the oil pan. Retain engine mounting brackets

and all attaching hardware with container to

assure availability of all parts when engine

container is to be reused. Install all disassembled

engine parts ,

removed from containers, on

engines that are to be made operational.

Figure 8-8. Engine mounting bracket -

installed view.

8-10. Reconditioning Container

a. Cleaning. Clean

the interior and exterior of

container using the process in C-1 of MIL-P-

116. Remove minor paint scale and rust with a

power buffer. If major rust exists, remove by

abrasive blasting.

b. Inspection.

Inspect interior and exterior of

upper and lower container sections for dents,

cracks,

or defective weld. Check mountin g

flanges for

alinement

container

bends. Bents that do not effect proper

of the upper and lower sections of

are permissible. Inspect the lower

8-14