TM-9-2815-202-34

ENGINE, DIESEL W/CONTAINER: MODEL 7083-7395, 7083-7396, 7083-7398 AND 7083-7399

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

FEBRUARY 1990

TM-9-2815-202-34 - Page 195 of 670

TM9-2815-202-34

4-26. INJECTOR CONTROL TUBES & THROTTLE DELAY REPLACEMENT

This task covers:

a. Removal

b. Disassembly

c. Cleaning/Inspection

d. Assembly

e. Installation

INITIAL SETUP

MODELS

EXPENDABLE/DURABLE SUPPLIES

■

All

Fuel oil (App C, Item 21)

EQUIPMENT CONDITION

TOOLS AND SPECIAL TOOLS

Para Description

General mechanics tool kit (App B, Item 96)

4-11 Rocker arm covers removed

Torque wrench (App B, Item 101)

4-17 Fuel control rods disconnected

MANDATORY REPLACEMENT PARTS

1 Cotter pin (App F, Item 7)

2 Lockwashers (App F, Item 91)

a. Removal

NOTE

Steps (1) and (2) for throttle delay

(1)

(2)

(3)

(4)

assembly only apply to models

7083-7395 and 7083-7396.

Remove two nuts (1), two

Iockwashers (2), and U-bolt (3) from

throttle delay bracket (4). Discard

Iockwashers.

Remove piston and linkage assembly

(5) from throttle delay housing (6).

Remove four bolts (7) securing

injector control tube brackets (8) to

cylinder head.

Disengage rack levers (9) from

injector control racks (10) and lift tube

assembly (11 ) from cylinder head.

Change 1

4-93