TM-9-2815-202-34
ENGINE, DIESEL W/CONTAINER: MODEL 7083-7395, 7083-7396, 7083-7398 AND 7083-7399
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
FEBRUARY 1990
TM-9-2815-202-34 - Page 207 of 670
TM 9-2815-202-34
(4)
(5)
(6)
Remove nut (8) and Iockwasher (9)
from front of each camshaft. Discard
Iockwashers.
Remove pulley (10) at front of engine
using puller (1 1). Use an adaptor (12)
between end of camshaft and puller
screw to protect end of camshaft.
Using puller (13) and adaptor (12),
remove water pump drive gear (7)
from front of engine.
MODELS:
■
7083-7391
7083-7396
7083-7399
(7)
(8)
Remove woodruff key (14) and spacer
(15) from front of each camshaft.
Remove three camshaft intermediate
bearing lock screws (16) from top of
each cylinder block bank.
Change 1
4-105
Back to Top
