TM-9-2815-202-34

ENGINE, DIESEL W/CONTAINER: MODEL 7083-7395, 7083-7396, 7083-7398 AND 7083-7399

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

FEBRUARY 1990

TM-9-2815-202-34 - Page 214 of 670

TM9=2815-202-34

4-29. CAMSHAFT AND GEAR ASSEMBLIES REPLACEMENT

(Cent)

(2) Rotate camshafi gear(17) until webingear alineswith camshaft end bearing bolt hoIe.

Install three bolts (18) and three Iockwashers (19) to rear end bearing. Torque bolts to 35-40

@

lbJft (47-54 N-m).

NOTE

Intermediate bearings must have a slight play when locked in position in block bore.

(3)

(4)

Revolve camshaft intermediate bearings (32) as required to aline locking hole in upper half

of bearing with tapped hole in top of cylinder block. Install three lock screws (16) to each

bank and torque screws to 15-20 Ib-ft (47-54 N-m).

Install other camshaft assembly in same manner.

16

22

@

4-112