TM-9-2815-202-34

ENGINE, DIESEL W/CONTAINER: MODEL 7083-7395, 7083-7396, 7083-7398 AND 7083-7399

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

FEBRUARY 1990

  TM-9-2815-202-34 - Page 216 of 670

TM9-2815-202-34
4-29. CAMSHAFT AND GEAR ASSEMBLIES REPLACEMENT (Cent)
(11)
(12)
(13)
(14)
(15)
Install water pump drive gear (7) to right bank camshaft.
Slip Iockwasher (9) over front end of each camshaft. Install nut (8) to front end of each
camshaft and finger tighten.
Wedge a rag between rear camshaft gears to prevent rotation. Torque nut (8) on each end of
both camshafts to 300-325 Ib-ft (407-441 N-m),
e
For models 7083-7391, 7083-7396, and 7083-7399, install camshaft adaptor (6) to water pump
drive gear (7). Secure in place with three bolts (4), and three Iockwashers (5). Torque bolts to
15-19 Ib-ft (20-26 N-m).
,
Install camshaft gear nut retainer (3) to each camshaft gear. Secure retainer plate in position
with four bolts (1) and four Iockwashers (2). Torque bolts to 35-39 Ib-ft (47-53 N-m).
.
4-114
Change 1


Back to Top