TM-9-2815-202-34

ENGINE, DIESEL W/CONTAINER: MODEL 7083-7395, 7083-7396, 7083-7398 AND 7083-7399

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

FEBRUARY 1990

TM-9-2815-202-34 - Page 509 of 670

TM9-2815-202-34

c. Cleaning/Inspection

WARNING

●

Dry cleaning solvent P-D-680 is toxic and flammable.

goggles and gloves and use only in a well-ventilated

Wear protective

area. Avoid

contact with skin, eyes, and clothes and don’t breathe vapors. Do not

use near open frames or excessive heat. The flash point is 100°F-138°F

(38°C-50

o

C). If you become dizzy while using cleaning solvent, get

medical aid. If contact with eyes is made, wash your eyes with water

and get medical aid immediately.

●

Compressed air used for cleaning purposes will not exceed 30 PSI.

Use only effective chip guarding and personal protective equipment

(goggles/shield, gloves, etc).

(1) Clean all parts with dry cleaning solvent and dry with compressed air.

(2) Inspect adaptor, pipe, and shell for cracks, pitting,

(3) Inspect filter element for cuts, tears, or damaged.

d. Assembly

or damage.

(1)

(2)

Install gasket (16) and breather pipe (15) onto adaptor (12). Secure with two lockwashers

(14) aid two bolts (1 3). Torque bolts to 30-35 lb-ft (41-47 N-m).

Install filter element (10) and shell (11) onto adaptor (12) and secure with spacer (9), fiat

washer (8), and bolt (7). Torque bolt to 30-35 lb-ft (41-47 N-m).

e. installation

(1)

(2)

Install gasket (6) onto breather assembly (5).

Position breather assembly (5) onto flywheel housing

and secure with two bolts (1), bolt (2), three bolts (3),

and six lockwashers (4). Torque bolts to 30-35 lb-ft

(41-47 N-m).

6-27