TM-9-2815-202-34

ENGINE, DIESEL W/CONTAINER: MODEL 7083-7395, 7083-7396, 7083-7398 AND 7083-7399

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

FEBRUARY 1990

TM-9-2815-202-34 - Page 510 of 670

TM9-2815-202-34

6-16. CRANKCASE BREATHER REPLACEMENT (Cont)

CRANKCASE BREATHER TUBE REPLACEMENT

a. Removal

(1) Remove bolt (17), nut (18), and lockwasher (19) securing clip (20) and tube (21) to flywheel

housing. lf necessary, remove clip from

tube. Discard lockwasher.

(2) Remove twobolts (22), two clockwashers (19), and flatwasher (23) securing tube (21) and

gasket (24) to cylinder block. Remove

tube

from

block. Discard Iockwashers and gasket.

NOTE

Do not remove breather pipe unless damaged. Removal of pipe will destroy it and

require its replacement.

(3) If necessary, remove breather pipe (25) from cylinder block,

b. Inspection

Inspect tube and breather pipe for cracks, holes, or damage.

c. Installation

(1) If removed, drive new breather pipe (25) into cylinder block with a collar and soft-headed

hammer until flush with counterbore.

6-28