TM-9-2815-202-34

ENGINE, DIESEL W/CONTAINER: MODEL 7083-7395, 7083-7396, 7083-7398 AND 7083-7399

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

FEBRUARY 1990

TM-9-2815-202-34 - Page 584 of 670

TM9-2815=202=34

8-13. GOVERNOR BUFFER SCREW ADJUSTMENT

Thistask covers: Adjustment

●

INITIAL SETUP

MODELS

EQUIPMENT CONDITION

Para Description

8-6

Bufferscrewbacked out

TOOLS AND SPECIAL TOOLS

General mechanics tool kit (App B, Item 96)

Turbocharger Inlet shield (App B, Item 81)

Adjustment

a.

b.

c.

Avoid

avoid

Wear

WARNING

contact with hot manifolds, pulleys,

personal injury.

proper ear protection when runnina

and other moving parts to

engine. Noise volume of

engine can cause

-

hearing loss or in jury.-

Protective turbocharger air inlet shield must be installed prior to doing

maintenance when engine is running and ah’ inlet has been removed.

Contact with rotating blades will cause injury to personnel.

CAUTION

Run engine in clean area when air intake ducting is removed. Dirt, dust, and particles

in unfiltered air can enter engine and damage parts or cause mechanical failure.

Start engine and operate until normal operating temperature is 165-185°F (71.1 -85. O”C).

Place governor speed control lever (1) in IDLE position.

Hold buffer screw (2) and loosen buffer screw locknut (3).

8-32

Change 1