TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 172 of 856

REMOVAL

1.

Disconnect hose assembly (Figure 1, Item 4) from elbow (Figure 1, Item 5) on fuel strainer assembly

(Figure 1, Item 9).

2.

If necessary, remove elbow (Figure 1, Item 5) from fuel strainer assembly (Figure 1, Item 9).

3.

Disconnect hose assembly (Figure 1, Item 1) from tee (Figure 1, Item 14) on fuel filter assembly

(Figure 1, Item 11).

4.

Disconnect hose assembly (Figure 1, Item 3) from connector (Figure 1, Item 2) on fuel filter assembly

(Figure 1, Item 11).

5.

If necessary, remove pipe plug (Figure 1, Item 15) from tee (Figure 1, Item 14) in fuel filter assembly

(Figure 1, Item 11).

6.

If necessary, remove two pipe plugs (Figure 1, Item 13), connector (Figure 1, Item 2), and tee

(Figure 1, Item 14) from fuel filter assembly (Figure 1, Item 11).

NOTE

It may be necessary to remove two screws (Figure 1, Item 12) from upper section of fuel

filter assembly, to remove the lower canister due to interference (WP 0031).

7.

Remove two nuts (Figure 1, Item 8), two lockwashers (Figure 1, Item 7), and two flat washers

(Figure 1, Item 6) from two screws (Figure 1, Item 12), fastening fuel filter assembly (Figure 1, Item 11) and

fuel strainer assembly (Figure 1, Item 9) to filter mounting bracket (Figure 1, Item 10). Remove fuel strainer

(Figure 1, Item 9) and fuel filter (Figure 1, Item 11) assemblies. Discard lockwashers.

15

14

9

1

2

3

4

5

6

7

8

13

10

12

11

MAINT_068

Figure 1.

Fuel Filter Removal/Installation.

TM 9-2815-205-24

0023

0023-2