TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 184 of 856
REMOVAL
1.
Disconnect hose assembly (Figure 1, Item 1) from connector (Figure 1, Item 2) in top of turbocharger
(Figure 1, Item 3).
2.
Remove screw (Figure 1, Item 5) and lockwasher (Figure 1, Item 4) from clip (Figure 1, Item 7) on hose
assembly (Figure 1, Item 1) at plate (Figure 1, Item 8) on rear of left cylinder head. Discard lockwasher. If
necessary, remove clip (Figure 1, Item 7) from hose assembly (Figure 1, Item 1).
3.
For model 5063-5392, remove screw (Figure 1, Item 12), flat washer (Figure 1, Item 16), lockwasher
(Figure 1, Item 15), and nut (Figure 1, Item 14) from clip (Figure 1, Item 13) on hose assembly
(Figure 1, Item 1) and from bracket (Figure 1, Item 17) on air inlet housing. Discard lockwasher. If
necessary, remove clip (Figure 1, Item 13) from hose assembly (Figure 1, Item 1).
4.
For models 5063-5393 and 5063-539L, remove screw (Figure 1, Item 11) and lockwasher
(Figure 1, Item 10) from clip (Figure 1, Item 9) on hose assembly (Figure 1, Item 1) at left side of flywheel
housing. Replace screw and lockwasher. If necessary, remove clip from hose assembly.
5.
Disconnect hose assembly (Figure 1, Item 1) from oil filter adaptor (Figure 1, Item 6). Refer to (WP 0018) for
model 5063-5392 or (WP 0019) for models 5063-5393 and 5063-539L.
MODEL
5063-5392
MODELS
5063-5393
5063-539L
1
2
3
4
5
1
6
7
8
1
9
7
4
5
10
11
12
13 1
3
14
15
16
17
MAINT_075
Figure 1.
Turbocharger Oil Supply Line Removal/Installation.
END OF TASK
TM 9-2815-205-24
0025
0025-2
Back to Top
