TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 786 of 856

11.

On models 5063-5392, 5063-5393, and 5063-539L, connect air box drain tube (Figure 14, Item 44) to elbow

(Figure 14, Item 43).

44

43

LEFT SIDE REAR

MODELS

5063-5392

5063-5393

5063-539L

MAINT_435

Figure 14.

Air Box Drain Tube Assembly.

Run-in Procedure

CAUTION

Observe engine operation closely at all times. Operator must detect malfunctions which

may develop early. Correct minor problems immediately so that major problems will not

develop and cause engine damage.

NOTE

During Period 1, remove rocker arm covers, inspect for fuel oil and coolant leaks in

the rocker arm compartment, and install rocker arm covers (WP 0052) ,

(WP 0053), or (WP 0054).

After completion of Period 2, adjust governor gap (WP 0100).

After completion of Period 5, adjust idle speed, no-load speed, and buffer screw

(WP 0100).

1.

Using appropriate run-in schedule (see Table 2), start and run engine. Record the following data for each

run-in period.

TM 9-2815-205-24

0101

0101-14