TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 777 of 856
25
4
23
24
3
21
NO
FUEL
3
MAINT_425
Figure 4.
Spare Fuel Tube Installation.
19.
Remove bolt (Figure 5, Item 14), convex washer (Figure 5, Item 15), clamp (Figure 5, Item 16), cylinder
compression tester (Figure 5, Item 12), and cylinder compression adapter (Figure 5, Item 21) from
cylinder head.
20.
Align dowel (Figure 5, Item 26), on injector (Figure 5, Item 13), with locating hole in cylinder head. Install
injector in injector tube.
21.
Install clamp (Figure 5, Item 16), convex washer (Figure 5, Item 15), and bolt (Figure 5, Item 14) with
convex side of washer facing clamp. Torque bolt to 20–25 lb-ft (27–34 N·m).
4
26
12
13
14
15
16
18
21
22
MAINT_426
Figure 5.
Remove Cylinder Tester and Install Injector.
TM 9-2815-205-24
0101
0101-5
Back to Top
