TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 781 of 856
Fuel Pressure
1.
Remove fuel inlet tube assembly (Figure 9, Item 30) from injector (Figure 9, Item 33) and fuel inlet manifold
(Figure 9, Item 32).
2.
Connect fuel pressure gage (Figure 9, Item 31) to injector (Figure 9, Item 33) and fuel manifold
(Figure 9, Item 32).
WARNING
Avoid contact with hot manifolds, pulleys, and other moving parts. Wear proper ear
protection when running engine. Failure to comply may result in injury to personnel.
3.
Start engine and operate at 2500 rpm. Note reading on fuel pressure gage (Figure 9, Item 31). Fuel
pressure must be 45–70 psi (310–483 kPa) at 2500 rpm.
31
32
33
30
MAINT_430
Figure 9.
Remove Fuel Inlet Tube and Install Fuel Pressure Gage.
TM 9-2815-205-24
0101
0101-9
Back to Top
