TM-9-2815-205-34
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
AUGUST 1992
TM-9-2815-205-34 - Page 19 of 596
TM 9-2815-205-34
1-8. LOCATION AND DESCRIPTION OF COMPONENTS
a.
b.
c.
d.
e.
f.
g.
Water Pump (1).
Mounted on the top of the oil
cooler and driven by belts from the camshaft
front pulley. It circulates coolant through the
cylinder block, cylinder heads, and oil cooler.
Valve Rocker Covers (2).
Encloses the valve
and injector rocker arm mechanisms located
on top of cylinder heads.
Engine Oil Cooler (3) .
Mounted on lower left
side of engine block, It uses engine coolant to
cool engine oil. Models 5063-5299 and
5063-5392 have the transmission coolers in
the same housing.
Transmission Oil Cooler (4).
Models
5063-5393 and 5063-539L has a separate
transmission oil cooler mounted on left side of
engine block, H uses engine coolant to cool
transmission oil.
Exhaust Manifolds
(5). Attached directly to
cylinder heads, For all except model
5063-5299, they route exhaust gases through
attached exhaust piping to the turbocharger.
Liquid Level Gage (Oil) Rod (6).
On model
5063-5299, it is mounted on the left rear of the
cylinder head. On model 5063-5392, it is
mounted on the right rear of the cylinder head.
On models 5063-5393 and 5063-539L, it is
mounted on the right front of the cylinder head.
On models 5063-5395, 5063-5398, and
5063-539F, it is mounted on the middle of the
right cylinder head, It measures the liquid level
in the oil pan.
Thermostat and Housing Assembly (7).
Mounted on the front of the left cylinder head
and connected to the right cylinder head with
crossover tube. It controls coolant temperature
by restricting coolant flow to the radiator.
Change 1
1-7
Back to Top
