TM-9-2815-210-34-2-2
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2
APRIL 1981
TM-9-2815-210-34-2-2 - Page 354 of 968
TM 9-2815-210-34-2-2
(4) Assembly.
FRAME 1
1.
Put two bleeder valves (1) in fuel filter head (2).
2.
Put in
3.
Put in
4.
Put in
5.
Put in
NOTE
Relief valve can have valve, spring, and 3/4-
inch hexagon head plug or ball, spring, and 1-
inch hexagon plug.
Relief valve assemblies cannot
be switched between fuel filter heads.
Early model
fuel filter heads have two bleeder valves. Late
model fuel filter heads have only one bleeder valve
in middle of head.
relief valve (3) or ball (4).
spring (5).
preformed packing (6) or gasket (7).
relief valve plug (8).
GO TO FRAME 2
4-335
Back to Top
