TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 347 of 968

TM 9-2815-210-34-2-2

FRAME 3

1.

Take two bleeder valves (1) out of fuel filter head (2).

NOTE

Relief valve can have valve, spring, and 3/4-inch

hexagon head plug or ball, spring, and 1-inch

hexagon plug.

Relief valve assemblies cannot be

switched in fuel filter heads and individual parts

of relief valve assemblies cannot be switched.

Early model fuel filter heads have two bleeder

valves.

Late model fuel filter heads have only one

bleeder valve in middle of head.

2.

Take out relief valve plug (3 or 4), preformed packing (5) or gasket (6),

spring (7 or 8), and relief valve (9) or ball (10) from fuel filter head (2).

3.

Throw away preformed packing (5) or gasket (6).

GO TO FRAME 4

4-328