TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 343 of 968

TM 9-2815-210-34-2-2

4-32.

FUEL INJECTION PUMP OIL HOSE.

a. Cleaning .

FRAME 1

1.

Clean oil

NOTE

Some early model LDS-465-1 fuel injection pumps (1)

use two oil hoses (2 and 3). Late model LDS-465-1

fuel injection pumps and fuel injection pumps for all

other engines use only one oil hose (2).

hose (2) or two oil hoses (2 and 3) with soap and water.

WARNING

Dry cleaning solvent is flammable. Do not use near

an open flame.

Keep a fire extinguisher nearby when

solvent is used.

Use only in well-ventilated places.

Failure to do this may result in injury to personnel

and damage to equipment.

2.

Clean elbow (4) with dry cleaning solvent. Dry with clean cloth.

3.

If working on early model LDS-465-1 with two hoses (2 and 3), clean elbow (5),

bracket (6), and loop clamp (7) with dry cleaning solvent. Dry with clean

clot h .

END OF TASK

4-324