TM-9-2815-210-34-2-2
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2
APRIL 1981
TM-9-2815-210-34-2-2 - Page 335 of 968
TM 9-2815-210-34-2-2
b .
Cleaning.
FRAME 1
1.
2.
WARNING
Dry cleaning solvent is flammable. Do not use near an
open flame. Keep a fire extinguisher nearby when solvent
is used.
Use only in well-ventilated places. Failure to do
this may result in injury to personnel and damage to
equipment.
Clean all parts in dry cleaning solvent. Clean off sludge and gum deposits
with a stiff brush.
Dry oil cooler and filter housing (1) with clean cloth.
WARNING
Eye shields must be worn when using compressed air. Eye
injury can occur if eye shields are not used.
Clean oil passages in oil cooler and filter housing (1) with dry cleaning
solvent.
Blow dry with compressed air.
END OF TASK
4-316
Back to Top
