TM-9-2815-210-34-2-2
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2
APRIL 1981
TM-9-2815-210-34-2-2 - Page 327 of 968
TM 9-2815-210-34-2-2
(4) Assembly.
FRAME 1
1.
Put two pipe plugs (1) into flywheel housing (2).
2.
Put in
3.
Put in
4.
Put in
NOTE
If any of three studs (3), eight studs (4), or 13
studs (5) were taken out, do steps 2, 3, and 4.
three studs (3).
four studs (4) on each side of housing (2).
13 studs (5).
END OF TASK
4-308
Back to Top
