TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 322 of 968

TM 9-2815-210-34-2-2

(3) Inspection and repair.

FRAME 1

1.

Check that three studs (1), two pipe plugs (2), and 12 screw thread inserts

(3) are not stripped, crossthreaded or damaged in any other way. If parts

are damaged, get a new part.

2.

Check that flywheel housing (4) •is not cracked, bent or has minor nicks,

burrs or scratches on gasket surface (5). Take off small nicks, burrs or

scratches with a fine mill file or crocus cloth. If more repair is needed, get

a new flywheel housing.

END OF TASK

4-303