TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 315 of 968

TM 9-2815-210-34-2-2

(2) Cleaning.

FRAME 1

WARNING

1.

2.

3.

Dry cleaning solvent is flammable. Do not use near

an open flame.

Keep a fire extinguisher nearby when

solvent is used.

Use only in well-ventilated places.

Failure to do this may result in injury to personnel

and damage to equipment.

Clean flywheel housing (1) and cover (2) with dry cleaning solvent. Dry with

clean cloth.

Clean pipe plug (3), screws (4), studs (5), and inserts (6) with dry cleaning

solvent.

Let parts air dry.

Clean fitting (7) with dry cleaning solvent and wire probe.

END OF TASK

4-296