TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 311 of 968

TM 9-2815-210-34-2-2

FRAME 2

1.

Clean outside of air pressurization tubes (1, 2 and 3) with soapy water. Let

tubes air dry.

WARNING

Dry cleaning solvent is flammable. Do not use near

an open flame.

Keep a fire extinguisher nearby when

solvent is used. Use only in well-ventilated places.

Failure to do this may result in injury to personnel

and damage to equipment.

Eye shields must be worn when using compressed air.

Eye injury can occur if eye shields are not used.

2.

Clean tee connectors (4 and 5) with dry cleaning solvent. Blow dry with com-

pressed air.

END OF TASK

4-292