TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 331 of 968

TM 9-2815-210-34-2-2

4-30.

OIL FILTER BODY ASSEMBLY.

a. Disassembly.

FRAME 1

1.

Take

2.

Slide

3.

Take

4.

Take

NOTE

Task is the same for both oil filter body assemblies.

Some filters use cotter pin through center post to

hold spring (2) and spring cup (3). If used, it

must be taken out.

out and throw away cotter pin (1), if used.

spring (2) and spring cup (3) off post (4).

post (4) out of filter body (5).

gasket (6) off post (4) and throw away gasket.

END OF TASK

4-312