TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

  TM-9-2815-210-34-2-2 - Page 332 of 968

TM
b .
Cleaning.
There are no special cleaning procedures needed.
cleaning procedure given in para 4-3.
c .
Inspection and Repair.
FRAME 1
9-2185-210-34-2-2
Refer to
WARNING
Dry cleaning solvent is flammable. Do not use near
open flame.
Keep fire extinguisher nearby when
solvent is used.
Use only in well-ventilated places.
Failure to do this may result in injury to personnel
and damage to equipment.
1.
Check to see that filter body (1) is not damaged. Repair any minor damage
with fine mill file or crocus cloth dipped in dry cleaning solvent. lf filter body
is damaged too much to be repaired, get a new one.
2.
Check to see that post (2) is not damaged.
Repair minor damage with fine mill
file, thread chaser, or crocus cloth dipped in dry cleaning solvent. If post is
damaged too much to be repaired, get a new one.
3.
Check that spring (3) and spring cup (4) are not damaged. Get a new one if
either one is damaged.
END OF TASK
4-313


Back to Top