TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 328 of 968

TM 9-2815-210-34-2-2

4-29.

FLYWHEEL ASSEMBLY.

a.

Cleaning.

There are no special cleaning procedures needed. Refer to

cleaning procedures given in para 4-3.

b .

Inspection and Repair.

FRAME 1

1.

Check that clutch face (1) of flywheel (2) has no grooving, scuffing, evidence

of overheating, warping or cracks.

2.

Using straight edge and 0.0040 feeler gage, check flatness of clutch face (1).

3.

Fix minor

solvent.

Dry cleaning solvent

an open flame. Keep

WARNING

is flammable.

Do not use near

a fire extinguisher nearby when

solvent is used.

Us-e only in well-ventilated places.

Failure to do this may result in injury to personnel and

damage to equipment.

damage to clutch face (1) using crocus cloth dipped in dry cleaning

[f more repair is needed, have clutch face machined or get a new one.

GO TO FRAME 2

4-309