TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 485 of 968

TM 9-2815-210-34-2-2

(2) Cleaning.

There are no special cleaning procedures needed. Refer to

cleaning procedures given in para 4-3.

(3) Inspection and repair.

FRAME 1

1.

2.

3.

4.

Check that discharge manifold (1) has no cracks or other

machined surfaces have no nicks, burrs or raised metal.

threads.

Fix burrs or raised metal and minor thread damage with a fine mill file.

damage.

Check that

Check for stripped

Check that mating surface of discharge manifold (1) has no warpage. If mating

surface is not flat, work surface across a sheet of crocus cloth held tightly to

a flat surface.

If discharge manifold (1) is cracked or badly damaged, throw it away and get a

new one.

END OF TASK

4-466