TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 743 of 968

TM 9-2815-210-34-2-2

FRAME 2

1.

2.

3.

4.

5.

Put

Put

Put

Put

NOTE

Two types of top mounted-covered flame heater fuel

pump and ignition units have been used on these en-

gines.

Type A and type B assemblies have the same

parts and are put back in the same way.

90° elbow (1) and 45° elbow (2) into flame heater fuel pump (3).

fuel pump (3) in place.

Put on two spring clamps (4),

wiring harness (5) in place. Screw on

flame heater fuel pump-to-flame heater

in and tighten fitting ‘nut’(8).

Put flame heater fuel pump-to-flame heater

Screw in and tighten fitting nut (10).

GO TO FRAME 3

and tighten nut (6).

nozzle tube (7)

fuel filter tube

in place.

Screw

(9) in place.

5-114