TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 747 of 968

TM 9-2815-210-34-2-2

FRAME 2

1.

2.

3.

Put two

NOTE

Some pumps (2) may have two clamps (1), Others may

have only one clamp.

clamps (1) on fuel pump (2). Put in elbow (3).

Put fuel pump (2) in place.

Put in two screws with lockwashers (4). Put

fuel pump-to-flame heater nozzle tube (5) in place. Screw in and tighten

fitting nut (6).

Put flame heater wiring harness (7) in place. Screw on and tighten nut (8).

GO TO FRAME 3

5-118