TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 756 of 968

TM 9-2815-210-34-2-2

FRAME 2

CAUTION

1.

2.

3.

4.

5.

Do not use open end wrench to tighten fitting adapters

(1). Use only tubing wrench or box end wrench. Fail-

ure to use the correct tool may result in damage to fitting

adapters.

Put in two fitting adapters (1).

Put fuel return tube (2) in place.

Screw in and tighten fitting nut (3).

Put fuel inlet tube (4) in place.

Screw in and tighten fitting nut (5).

Screw in spark plug (6) with gasket (7).

Tighten spark plug to 8 pound-

inches.

Put ignition lead (8) in place. Screw on and tighten nut (9).

END OF TASK

5-127