TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 759 of 968

TM 9-2815-210-34-2-2

1.

2.

3.

4.

Put nozzle and valve

nut (3).

Screw in sparkplug

inches.

assembly (1) on flame heater assembly (2).

(4) with gasket (5).

Tighten spark plug to

CAUTION

Do not use open end wrench to put on pipe bushing (6)

or tube adapter (8).

Use only tubing wrench or box

wrench or equipment may be damaged.

If working on type A flame heater assembly, put in pipe bushing

tighten. Screw in 90° elbow (7) and tube adapter (8).

CAUTION

Do not use open end wrench to put on tubing adapters

Tighten

8 pound-

(6) and

(9). Use only tubing wrench or box wrench or equipment

may be damaged.

If working on type B flame heater assembly, put in two tube adapters (9).

GO TO FRAME 5

5-130