TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 757 of 968

TM 9-2815-210-34-2-2

(3) Engine LDS-465-1.

FRAME 1

1.

2.

3.

NOTE

There are three types of intake manifold flame heater

assemblies.

All three have nozzle assembly, fuel inlet

tube, fuel return tube, spark plug and ignition lead for

spark plug. These parts are in different positions on

each type of flame heater assembly but are put back the

same way except where noted.

If working on flame heater type C, go to frame 4.

Put flame heater elbow gasket (1) in place. Put flame heater elbow (2) in

place.

Put on two nuts with lockwashers (3).

Put on hose (4). Put on and tighten two hose clamps (5).

GO TO FRAME 2

5-128