TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 761 of 968

TM 9-2815-210-34-2-2

FRAME 5

1.

2.

3.

4.

5.

NOTE

Plugs and tags put on during removal must be taken

off during replacement.

If working on type A or B, flame heater assembly, put ignition unit (1) with

two

Put

Put

Put

Put

clamps (2) in place.

on two nuts with lockwashers (3).

flame heater cable assembly (4) in place. Tighten nuts (5 and 6).

NOTE

Type C flame heater assembly may not have tube clamp (7).

wiring harness (8) with tube clamp (7) in place. Tighten nut (9).

tube clamp (7) in place and put on nut with lockwasher (10).

GO TO FRAME 6

5-132